In-house laboratory
General testing of raw materials and finished goods is carried out on site, so problems are caught before steel leaves the yard.
Quality
Quality assurance
We aspire to the highest standard of quality in each of our activities so as to satisfy the specific requirements of our clients.
Our commitment
Verified, not self-certified.
Establishment of an in-house laboratory for general testing and collaboration with the Central Material Testing Laboratory, Lalitpur, for specific testing of raw materials and finished goods are a few of the evidences of our quality commitment.
01 02 Central Material Testing Laboratory
For specific testing we collaborate with the Central Material Testing Laboratory in Lalitpur — independent verification, not self-certification.
03 Semi-automated process control
The galvanizing plant runs on semi-automated control for consistent bath chemistry, immersion time and coating thickness.
04 Single-point responsibility
Design, fabrication, galvanizing and erection all sit with one company. There is no gap between trades for defects to hide in.
Standards we work to
Galvanizing to a written specification.
Coating thickness on our galvanized sections follows the minimum mean coating thickness set out in ISO 1461, matched to the thickness of the steel section.
| Steel section thickness | Minimum mean coating | Typical application |
|---|---|---|
| Under 1.5 mm | 45 µm | Light gauge sheet and cladding fixings |
| 1.5 mm to 3 mm | 55 µm | Purlins, light angles, brackets |
| 3 mm to 6 mm | 70 µm | Truss members, tower sections |
| Over 6 mm | 85 µm | Plate girders, heavy structural members |
Reference values from ISO 1461. Project specifications may require a heavier coating — tell us the requirement and we will confirm against it.
Have a structure to fabricate?
Send us your drawings, tonnage and site location. We will come back with a scope, a galvanizing plan and a delivery schedule.